A heliport is typically a small airport that is mostly used for helicopters. It has its helipad and other facilities that is needed for it. There are certain standards that it has to follow. If you have a heliport then you have to follow those standards so that you can be sure that it is safe to be used.
Of course, just like in an airport, it also needs to have some lighting. The heliport lights could serve as a guide when there will be a helicopter that would land on it. A person has to make sure that the lighting he has for it is the one that is suitable for it. These lights are not like ordinary lights. They come in various shapes. It also has various uses as well. There are certain types of it that you can purchase on stores. In the following paragraphs, you would know the types which you need to have if you own a heliport.
One needs to provide perimeter light. You are going to use this in marking the spot of the Final Approach and Take Off area. This would help the pilot in determining which zone is good for landing especially when he has to operate during the night and if the weather is unpleasant. By requirement, you should have sixteen pieces of this but because you would be working on a smaller area, you can use only eight pieces.
Have those that is necessary for touchdown. A person will place this on areas for Touchdown and Liftoff. You should place it a little close to each one unlike the one for approach and for takeoff. You would normally have this placed in the center part of FATO in the place that the helicopter is landing or taking off.
Use the one for the direction on landing. Some will place this at the runway. This could be seen even from far away. It has been designed so it will illuminate on night time and unpleasant weather so landing would be safe.
Floodlights are also require. You will easily notice is since it is hooded. This helps lighten up your place for landing and protect your pilot from the glare. You have to make sure you have one which signals obstruction. It will mark obstructions on FATO and TLOF. One could get the pole mounted type or the ground mounted depending on preference.
You should also have some wind cones. This would indicate the direction of the wind. It has a really bright color which helps it become more visible even in bad weather conditions. It could be installed on the ground, roof or walls.
Beacons have the same purpose as the other ones. But, this one is made specifically for operations during the night. The light it illuminates is brighter compared to others making it easier to mark locations. One should not forget the controller for their lighting system.
If one will invest on equipment like these, you have to verify first if the store selling it is accredited. If you would be having it from a store like that then you can never doubt the quality of it. This equipment is essential so you have to consider the quality too.
Of course, just like in an airport, it also needs to have some lighting. The heliport lights could serve as a guide when there will be a helicopter that would land on it. A person has to make sure that the lighting he has for it is the one that is suitable for it. These lights are not like ordinary lights. They come in various shapes. It also has various uses as well. There are certain types of it that you can purchase on stores. In the following paragraphs, you would know the types which you need to have if you own a heliport.
One needs to provide perimeter light. You are going to use this in marking the spot of the Final Approach and Take Off area. This would help the pilot in determining which zone is good for landing especially when he has to operate during the night and if the weather is unpleasant. By requirement, you should have sixteen pieces of this but because you would be working on a smaller area, you can use only eight pieces.
Have those that is necessary for touchdown. A person will place this on areas for Touchdown and Liftoff. You should place it a little close to each one unlike the one for approach and for takeoff. You would normally have this placed in the center part of FATO in the place that the helicopter is landing or taking off.
Use the one for the direction on landing. Some will place this at the runway. This could be seen even from far away. It has been designed so it will illuminate on night time and unpleasant weather so landing would be safe.
Floodlights are also require. You will easily notice is since it is hooded. This helps lighten up your place for landing and protect your pilot from the glare. You have to make sure you have one which signals obstruction. It will mark obstructions on FATO and TLOF. One could get the pole mounted type or the ground mounted depending on preference.
You should also have some wind cones. This would indicate the direction of the wind. It has a really bright color which helps it become more visible even in bad weather conditions. It could be installed on the ground, roof or walls.
Beacons have the same purpose as the other ones. But, this one is made specifically for operations during the night. The light it illuminates is brighter compared to others making it easier to mark locations. One should not forget the controller for their lighting system.
If one will invest on equipment like these, you have to verify first if the store selling it is accredited. If you would be having it from a store like that then you can never doubt the quality of it. This equipment is essential so you have to consider the quality too.
No comments:
Post a Comment